1. 45 degree adjustable metal stone mitre clamp is mainly use for the man-made and natural tile stone, or other similar sheet of 45 stitching.

2. When two work pieces are processed into 45 edge bevel, then clean the 45 bevel face assembling together, and the two 45 work piece fit into a 90 with each other, use the fixture in plastic extrusion seam stitching.

3. Put the bottom of width stone on the fixture work surface which with white rubber, the side of the narrow stone close to the 90 inside of the fixture.

4.Then two binder lever can be adjusted by adjusting spring device access to the top position of the work piece, then rotating the screw at the top of the binder lever to put pressure in place to maintain the fixture locked position for a certain time, until the work piece fully bonded joints, solid, and then release the fixture.

Package List：
1x 45 Degree Stone Miter Clamp